Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

VINYL STRIP DOORS

Vinyl Strip Door

Clear-Flex II Strip Doors

Our Clear-Flex II Strip Doors save you energy costs by reducing the amount of heated or cooled air lost through your unprotected openings. Superior design features assure maximum efficiency and safety. Our special fabrication process keeps the strips hanging straight without warping, even under temperature extremes.

Our strip doors and curtains provide a virtually unbreakable sound barrier. Tests by an independent testing laboratory have confirmed that Clear-Flex II Strip Doors significantly reduce the transmission of sound. Researchers assigned our products a sound transmission rating of Class 13.

Maintenance is minimal with the Clear-Flex II Strip Door. An occasional application of our exclusive Vinyl Strip Cleaner is usually all that is required.

Clear-Flex II Strip Doors also prevent the movement of dust, dirt and other contaminants from one area to another. This can help reduce plant clean-up costs.


Examples of Clear-Flex II Strip Door Applications

Strip Door Applications

Clear-Flex II Formulations

Standard

Formulated for indoor/outdoor applications, withstanding temperatures from -10ºF to +150ºF. Our most versatile material, Clear-Flex II will not discolor in sun light. Available in smooth and ribbed in the following sizes:

  • 4" x .060" (Smooth only)
  • 6" x .060" (Smooth only)
  • 8" x .080"
  • 12" x .080" (Smooth only)
  • 12" x .120"
  • 16" x .160"
  • 48" x .060" (Smooth only)
  • 48" x .080" (Smooth only)
  • 48" x .120" (Smooth only)
  • 48" x .160" (Smooth only)

USDA/Low-Temp

Formulated with USDA approved ingredients. For interior applications only. Recommended for cooler/freezer applications. Meets requirements for food service operations. Remains flexible in temperatures as low as -40ºF.

  • 4" x .060" (Smooth only)
  • 6" x .060" (Smooth only)
  • 8" x .080"
  • 12" x .080" (Smooth only)
  • 12" x .120"
  • 16" x .160"
  • 48" x .080" (Smooth only)

USDA/Low-Temp Reinforced

Utilizes nylon string extruded within the material to prevent elongation or shrinkage of material due to temperature variations. Best for cooler/freezer door applications.

  • 6" x .060"
  • 8" x .080"
  • 12" x .120"
  • 16" x .160"

Dark Amber

Use for welding screen applications or as a partial sight barrier. Safe-Vue Welding Curtains effectively screen ultraviolet rays associated with welding while enabling supervisors to monitor the welders' activity and safety.

  • 8" x .080" (Smooth only)
  • 12" x .080" (Smooth only)
  • 12" x .120" (Smooth only)
  • 48" x .080" (Smooth only)

Opaque

Black only. Used for conveyor opening curtains or as a total sight barrier between areas. Not recommended for areas where any motorized traffic might be present.

  • 8" x .080" (Smooth only)

Anti-Static

Light green tint for identification. Reduces static electricity from objects or persons, dissipating it back into the atmosphere. User should determine suitability of this product for it's intended use.

  • 8" x .080" (Smooth only)
  • 12" x .120" (Smooth only)

Ambertech

Anti-insect and anti-glare, Ambertech restricts flying insects' ability to detect attracting lights and heat. Also reduces blinding daytime glare. Same physical properties as standard.

  • 8" x .080"
  • 12" x .120"

Opticolor

Three transparent colors to liven up the work place, designate entrance ways, or just match corporate colors. Colors available are Opti-Blue, Green and Beige.

  • 8" x .080"
  • 12" x .120"

Safety-Glo

The perfect solution for identifying passageways and dangerous areas when power fails. Material has a frosted (semi-transparent) appearance and recharges when exposed to light sources. Provides approximately one hour of brightness followed by a long, low afterglow.

  • 8" x .120"
  • 12" x .120"
  • 16" x .160"

Ribbed

Offset ribbed material reduces scratching and abrasions from heavy use. It lasts longer and provides a stronger seal than smooth material. Available in standard, USDA/Low-Temp, Ambertech, Opticolor and Safety-Glo in the following sizes:

  • 8" x .080"
  • 12" x .120"
  • 16" x .160" (Std, USDA and Safety-Glo only)

Clear-Flex II Physical Properties

PropertyASTM Test #DIN Test #UnitStandard USDA/Low-Temp
HardnessD-224053505Shore A7473
Tensile StrengthD-63853455PSI26102333
ElongationD-63853455%302317
Tear ResistanceD-100453515lb./in.324272
Cold Temp ResistanceD-74653372ºF-36ºF-76ºF
Light TransmittanceHunter-%2.823.94
Weather ResistanceQUV53384Delta E4.3136.75
FlammabilityD-2863--1919

Types of Mounting Bars

Strip Door Header MountStrip Door Header Mount  Strip Door Wall MountStrip Door Wall Mount

Standard Header Mount

Standard Header Mount Hardware fits between the jambs under the lintel of the doorway.
  

Standard Wall Mount

Standard Wall Mount Hardware mounts flush against the wall above the doorway opening.



Strip Door Universal MountStrip Door Universal MountStrip Door Universal Mount

Universal Mount Hardware

A. Wall
B. Header

Universal Mount Hardware is ideal if the method of mounting is not known when the order is placed. This hardware can be used as either Wall Mount or Header Mount.


line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.