|STOP IT® PIPE REPAIR SYSTEM|
Each container contains FIX STIX™ - hand moldable epoxy, and STOP IT® - knitted, fiberglass tape coated with a water-activated, polyurethane resin, gloves (for easy clean-up) and directions.
|The ideal team for repairing metal or plastic pipe leaks and reinforcing pipe joints in any situation - even under water!|
|STOP IT® PIPE REPAIR SYSTEM - STOP IT® over FIX STIX™|
This in-field repair system can be quickly applied - one man, no tools, not hot work - and it fully cures to a hard, durable repair in 30 minutes.
STOP IT® Pipe Repair Tape is a knitted, fiberglass tape coated with special urethane resins that are water-activated. It is ideal for repair of pipe leaks and reinforcing pipe joints in any situation - even under water!
FIX STIX™ is a hand moldable epoxy which sets rock hard in only 20 minutes. It is perfect for plugging leaks, filling cracks and complex voids and offsets.
Using FIX STIX™ in combination with the STOP IT® Pipe Repair Tape increases repair capacity. So use both to assure a better repair.
Whether repairing an active, gravity-flow leak or a 2" hairline crack, teaming STOP IT® and FIX STIX™ will improve the quality of your repair. The STOP IT® PIPE REPAIR SYSTEM is your dollar-saving ally in the battle against lost-production costs.
The 20-Minute Epoxy Stick
Fix anything... FAST! A hand-moldable, steel filled epoxy... stops leaks, fills holes and cracks and can be used as an adhesive.
FIX STIX™ has exceptional chemical resistance!
This simple, easy to use epoxy stick will stop leaks, fill holes and cracks fast. FIX STIX sets rock hard in about 20 minutes, works underwater and in a wide temperature range. FIX STIX is pre-measured, non-toxic, solvent free, has little odor and can be used on potable water lines. It will not shrink, crack or pull away. FIX STIX can be machined, threaded and painted after fully curing.
|When product flow cannot be interrupted, contain the leak with a STOP IT PIPE REPAIR CLAMP. This handy tool is uniquely faced with expanded PTFE which is the most effective seal for all common chemicals and is food grade acceptable.The clamp conforms to most irregular surfaces and controls most pressures with simple hand-tightening. The STOP IT PIPE REPAIR CLAMP easily adjusts to fit common diameter pipe.|
|FUSION TAPE bonds into a permanent, inseparable, cohesive insulator at room temperature and has a dielectric strength of 400 volts / mil. This remarkable tape maintains its insulating, sealing and elastic properties in a wide range of temperatures. It won't crack or separate with sudden shock, vibration, expansion or contraction. FUSION TAPE is not tacky to the touch and requires no heat or tools to promote fusion. Also, it resists moisture and ozone, making it an excellent environmental insulator.|
|Toll Free-800-940-4673||E-Mail - The Post Office|
|COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.|