Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

FLOW CONTROL VALVES




Series F

Two-step needle provides fine adjustments at low flow with the first three turns of the adjusting knob. The next three turns give full-open needle position and conventional throttling control. When flow is reversed, the heavy-duty poppet / retainer permits full-flow return capacity. Exclusive color-coded reference scale on the adjusting knob greatly simplifies flow setting, resetting, adjusting and return to an original flow. A simple set screw locks the valve on any desired setting.
  • Maximum operating pressure:
  • Black Oxide Steel: 5000 PSI for 1/8" - 1/2". 3000 PSI for 3/4"
  • Brass: 2000 PSI
Flow Control Valve -
Series F
Flow Control Valve - Series F
Part #
Steel
Part #
Brass
NPT
Thread
SFC200BFC2001/8"
SFC400BFC4001/4"
SFC600BFC6003/8"
SFC800BFC8001/2"
SFC1200BFC12003/4"



Series PF

Utilizes a ball type check that meters the flow of air or hydraulic oil in one direction and allows for free flow in the reverse direction. Used to control actuator speed by acting as a restriction. Recommended for use in non-shock applications
  • Maximum operating pressure:
  • Zinc Plated Steel with a Dichromate Seal: 5000 PSI, 5 PSI cracking pressure.
  • Brass: 2000 PSI, 5 PSI cracking pressure.
Flow Control Valve -
Series PF
Flow Control Valve - Series PF
Part #
Steel
Part #
Brass
NPT
Thread
-BPF2001/8"
SPF400BPF4001/4"
SPF600BPF6003/8"
SPF800BPF8001/2"



Series N

Ideal for use as speed control on hydraulic and pneumatic systems where a reverse flow check valve is not needed. Provides excellent control and reliable shutoff in a very small envelope. Color-coded reference scale on the adjusting knob simplifies setting, resetting, adjusting and quick return to a previous speed setting.
  • Maximum operating pressure:
  • Steel: 5000 PSI
  • Brass: 2000 PSI
Flow Control Valve -
Series N
Flow Control Valve - Series N
Part #
Steel
Part #
Brass
NPT
Thread
SN200BN2001/8"
SN400BN4001/4"
SN600BN6003/8"
SN800BN8001/2"
SN1200BN12003/4"



Series MV

With these high-precision metering and shutoff valves, you can readily make fine adjustments and reset with the exclusive color code 5000 that shows when you reach the desired setting.
  • Body components are precision-turned from solid barstock.
  • All models have 416 Stainless Steel needles.
  • Maximum operating pressure:
  • Steel: 5000 PSI
Flow Control Valve -
Series MV
Flow Control Valve - Series MV
Part #
Steel
NPT
Thread
SMV4001/4"
SMV6003/8"
SVM8001/2"

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.