Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

HOSE PROTECTION, SPRING GUARDS & FIRESLEEVES

Spiral Guard™ Hose & Cable Protection


Spiral Guard™
Hose & Cable Protection
Heavy duty hose, cable or wire protection, used to guard against rubbing, crushing and environmental hazards that decrease hose life. Used in Mining, Quarrying, Forestry, Offshore industries and most Hydraulic hose applications.
  • Crush resistant
  • High abrasion resistance
  • Chemical resistant
  • UV ray resistant
  • Self-lubricating to reduce hose wear
  • Easy to install on-site
  • Can be used on single or multiple hose bundles
  • Smooth radius on all edges
Part #
Flame Retardant
Part #
Standard
Spiral
Guard I.D.
Coil
Length
FRSGX16NFSGX161/2"66'
FRSGX20NFSGX205/8"66'
FRSGX25NFSGX253/4"66'
FRSGX32NFSGX3215/16"66'
FRSGX40NFSGX401-1/4"66'
FRSGX50NFSGX501-1/2"66'
FRSGX63NFSGX631-15/16"66'
FRSGX75NFSGX752-3/8"66'
FRSGX90NFSGX902-5/8"66'
FRSGX110NFSGX1103-3/16"33'
Flame Retardant: Temperature range: -148ºF to 212ºF
Standard: Temperature range: -58ºF to 194ºF
Flame Retardant: is approved by MSHA 1C-231/1 and is self extinguishing.



Round Wire Spring Guard


Round Wire Spring Guard
Spring guards should be considered for those applications which call for tough, steel armor protection. They offer heavy-duty hose defense against cuts and abrasion, with the added benefit of kink resistance and the ability to mold hose assembly routing for applications which require tight bends.
Material: Galvanized C1035 / C1040 steel
Part
Number
Coil
I. D.
Wire
Size
Pitch
Length
Package
Length
TI900.515".063".188"100'
TI901.550".063".188"100'
TI902.610".063".188"100'
TI903.650".080".188"100'
TI904.750".080".188"100'
TI905.835".080".188"100'
TI906.900".080".188"100'
TI907.990".080".188"100'
TI9081.055".080".188"100'
TI9091.110".080".250"100'
TI9101.240".080".250"100'
TI9111.300".120".375"60'
TI9121.380".120".375"60'
TI9131.630".120".375"60'
TI9151.810".120".375"60'
TI9162.000".120".375"40'
TI9172.125".120".375"40'
TI9192.300".120".375"40'



Flat Wire Spring Guard


Flat Wire Spring Guard
Spring guards should be considered for those applications which call for tough, steel armor protection. They offer heavy-duty hose defense against cuts and abrasion, with the added benefit of kink resistance and the ability to mold hose assembly routing for applications which require tight bends.
Material: Galvanized C1035 / C1040 steel
Part
Number
Coil
I. D.
Strip
Width
Strip
Thickness
Pitch
Length
Package
Length
TF900.515".375".028".500"100'
TF901.550".375".028".500"100'
TF902.610".375".028".500"100'
TF903.650".375".028".500"100'
TF904.750".375".028".500"100'
TF905.835".500".028".688"100'
TF906.900".500".028".688"100'
TF907.990".500".028".688"100'
TF9081.055".500".028".688"100'
TF9091.110".500".028".688"100'
TF9101.240".500".028".688"100'
TF9111.300".500".028".688"60'
TF9121.380".500".042".812"60'
TF9131.630".500".042".812"60'
TF9172.125".500".042".812"40'
TF9191.055".500".042".812"40'



Fire Sleeve for Hose


Fire Sleeve for Hose
Used to protect hose and hose assemblies, tubing, piping, wiring and cables from high temperatures or molten splash. Will also help maintain line temperature and reduce environmental overheating and overcooling. Sleeving slides easily over hose and expands to go over fittings. Compounded silicone rubber coating over fiberglass. Completely non-asbestos. Resistant to hydraulic fluids and lubricating oil.
Color is iron oxide red.
Temperature range: -65ºF to 500ºF.
Supplied in 50' lengths.
Part #Nominal I.D.
0610-41/4"
1010-63/8"
1310-81/2"
1610-105/8"
1910-123/4"
2210-147/8"
2510-161"
3210-201-1/4"
3810-241-1/2"
4510-281-3/4"
5110-322"



Nylon Protective Sleeves - MSHA Accepted


Nylon Sleeve for HoseNylon Sleeve for Hose
This woven nylon tubular sleeving is ideal for use as a protective covering on hydraulic and industrial hose. The tight weave of the seamless tubular sleeving helps dispense the flow of fluid in a ruptured hose. This sleeving is MSHA accepted. It withstands temperatures up to 375ºF, and fully passes flammability tests.
Part #Nominal
I.D.
Outside
Flat
100' Rolls300' Rolls
DHS90-100DHS90-3000.90"1.50"
DHS100-100DHS100-3001.00"1.66"
DHS106-100DHS106-3001.06"1.88"
DHS122-100DHS122-3001.22"2.13"
DHS138-100DHS138-3001.38"2.25"
DHS138-100DHS138-3001.38"2.25"
DHS142-100DHS142-3001.42"2.50"
DHS159-100DHS159-3001.59"2.62"
DHS159-1-100DHS159-1-3001.59"2.75"
DHS175-100DHS175-3001.75"2.88"
DHS181-100DHS181-3001.81"3.00"
DHS219-100DHS219-3002.19"3.63"
DHS238-100DHS238-3002.38"3.88"
DHS263-100DHS263-3002.63"4.25"
DHS288-100DHS288-3002.88"4.75"
DHS366-100DHS366-3003.66"5.88"


Fire Tape for Hose


Fire Sleeve for Hose
Silicone rubber tape used to seal the ends of fire sleeves to prevent fraying. Completely non-asbestos.
Color is iron oxide red.
Temperature range: -45ºF to 380ºF.
Part #Size
FTH1001" wide x 12 yards



Abrasion Sleeve


Abrasion Sleeve
A hose protection product used to help safeguard hose covers from abrasions and cuts. Typical areas of use include agricultural, logging, construction and mining applications. The abrasion sleeve is also useful for bundling two or more hose assemblies together, in addition to the protective qualities the sleeving provides. Available in .090" thin wall and .180" thick wall sleeving.
Thin Wall
Part #
Thick Wall
Part #
Sleeve
I. D.
Package
Length
TR900RG900.90"100'
TR901RG9011.06"100'
TR902RG9021.22"100'
TR903RG9031.35"100'
TR904RG9041.66"100'
TR905RG9051.81"100'
TR906RG9062.19"100'
TR907RG9072.62"100'
TR908RG9082.80"100'

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.