Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

DUCTING HOSE

Style RFH

Style RFH
Duct Hose
Constructed of thermoplastic rubber and reinforced with a wire helix, RFH is the most versatile general purpose hose available today. No cements, solvents, chemicals, adhesives or glues are used in the manufacturing process of RFH. RFH has superior chemical resistance and is capable of handling fumes as tough as Methyl Ethyl Ketone, sulfuric acid or toluene.
RFH can be manufactured in other colors. RFH can also be supplied with a color stripe. Please consult us as to minimums and prices for other lengths and non-standard diameters.
  • Wide temperature range: -60ºF to 275ºF continuous service, intermittent to 300ºF
  • Sizes: 1-¼" through 24" ID
  • Standard lengths: 25, 50 or 100 feet
  • Standard color: Black
  • Excellent ozone resistance
  • Superior chemical resistance
  • Good abrasion resistance
  • Low compression set

Available with Wear Strip: RFH-W

Available in White: RFH-White


Physical Characteristics
IDWorking
Pressure (PSI)
Vacuum
(In Hg)
Bend
Radius
Compression
Ratio
Nominal
OD
Wall
Thickness
1-¼"28301-½"1ft / 6in1.49"0.026"
1-½"24301-¾"1ft / 6in1.75"0.026"
1-¾"22302"1ft / 9in2.00"0.026"
2"17303-½"1ft / 6in2.27"0.030"
2-½"13284"1ft / 6in2.77"0.030"
3"10284-¼"1ft / 5in3.27"0.030"
3-½"10205-¼"1ft / 6in3.77"0.030"
4"10256-½"1ft / 6in4.29"0.030"
5"9158"1ft / 6in5.29"0.030"
6"811.58-¾"1ft / 6in6.29"0.030"
7"71010-½"1ft / 7in7.35"0.030"
8"65.512"1ft / 7in8.35"0.030"
10"4510-½"1ft / 4in10.38"0.030"
12"4413-¾"1ft / 4in12.38"0.030"
14"2218"1ft / 4in14.48"0.030"
16"2221"1ft / 4in16.48"0.030"
18"2221-½"1ft / 4in18.48"0.030"
20"1225-½"1ft / 4in20.5"0.030"
24"1136"1ft / 4in24.5"0.030"


Style UFD

Style UFD
Duct Hose
Constructed of thermoplastic urethane and reinforced with a wire helix, UFD offers superior abrasion resistance. UFD is the answer for those who want a lightweight, flexible hose which can handle much abrasion. UFD can be used in numerous applications such as leaf loading, chip handling, dust collection, straw blowing, etc. The superior transparency of the UFD allows users to locate blockages.
Consult us about non-standard diameters and lengths. Heavier or lighter versions are available for specific applications. Special colors are also available.
  • Temperature range: -65ºF to 200ºF
  • Sizes: 2" through 18" ID
  • Standard lengths: 25 or 50 feet
  • Colors: Clear or Black
  • High tear strength
  • Superior abrasion resistance

Physical Characteristics
IDWorking
Pressure (PSI)
Vacuum
(In Hg)
Bend
Radius
Compression
Ratio
Nominal
OD
Wall
Thickness
2"33302-½"1ft / 6in2.29"0.035"
2-½"30303"1ft / 6in2.79"0.035"
3"27303-½"1ft / 6in3.32"0.035"
4"18284-½"1ft / 5in4.34"0.035"
5"16265-½"1ft / 5in5.34"0.035"
6"1423.56-¼"1ft / 5in6.37"0.035"
7"12187-¼"1ft / 6in7.40"0.035"
8"1113.58-¾"1ft / 6in8.40"0.035"
10"9611-¼"1ft / 6in10.41"0.035"
12"7513-¼"1ft / 6in12.41"0.035"
14"4315-½"1ft / 6in14.56"0.035"
16"2318"1ft / 6in16.59"0.035"
18"2224"1ft / 6in18.59"0.035"


Silicone Fiberglass Hose Style SF-1

Style SF-1
Duct Hose
A one ply silicone fiberglass hose with a helically wound chemically treated spring steel wire bonded to the interior surface of the hose. A fiberglass cord is wound over the outside between the wire coils. The hose is heat vulcanized for maximum adhesion and rubber-to-wire bond.
Recommended for low pressure handling of air, dust or fumes. SF-1 is ideal for use in situations where minimum weight is a necessity. SF-1 is not recommended for liquids or abrasive materials.
  • Temperature range: -65ºF to 450ºF (Intermittent to 500ºF)
  • Standard length: 12 Feet
  • Color: Orange/red
  • Sizes: 1" to 12" ID

Silicone Fiberglass Hose Style SF-2

Style SF-2
Duct Hose
A two ply silicone fiberglass hose with a helically wound spring steel wire imbedded between the plies to insure maximum flexibility and minimum diameter restriction in sharp bend areas. The hose is wound with a fiberglass cord and heat vulcanized to provide greater strength and serviceability.
Recommended for handling of air, dust, fumes and light powders. The inner ply provides a smooth interior for maximum flow and minimum friction loss. SF-2 is lightweight, non-kinking and simple to install. SF-2 is not recommended for handling liquids or abrasive materials.
  • Temperature range: -75ºF to 500ºF (Intermittent to 600ºF)
  • Standard length: 12 Feet
  • Color: Orange/red
  • Sizes: 3/4" to 12" ID

Blue Max Style 2CN

Flexible Technologies
2CN Duct Hose
The industry standard for long term applications. Rugged, cost-effective hose for dust or fumes under low positive or negative pressures. Excellent tensile strength and crush resistance.
Options available include one ply construction (1CN) for temporary service or lighter applications. Please consult us for availability of non-standard ID's and lengths. Cuffed ends and additional coatings are also available.
  • Construction: 2 ply Cotton-Neoprene coating - Helical wire
  • Sizes: 1" to 24" ID
  • Standard length: 25 feet
  • Colors: Blue or Black
  • Temperature range: -40ºF to 250ºF

Exono-Max Style 1PV-WO

Flexible Technologies
1PV-WO Duct Hose
1PV-WO is an economical, lightweight and highly flexible hose. It meets the flame retardant spec UL94VTM-O. It has good resistance to ozone, UV rays and mildew. It is impervious to leakage from most oils, water, chemicals and grease. This is the most cost effective hose for lightweight applications.
Options available include non-standard ID's and lengths. This hose is also available with cuffed ends. While this hose features a wear strip for external abrasion, it is available without this strip (1PV).
  • Construction: One ply Polyester-Vinyl laminate with vinyl wear strip - Helical wire
  • Sizes: 3" to 24" ID
  • Standard length: 25 feet
  • Colors: Blue or black hose; Orange, red or black wear strip
  • Temperature range: -20ºF to 180ºF - Intermittent to 225ºF

Latch Loc Couplers

Flexible Technologies
Latch Loc Couplers

Bridge Clamps

Flexible Technologies
Bridge Clamps

Slip Loc Couplers

Flexible Technologies
Slip Loc Couplers

Duct Connectors

Flexible Technologies
Duct Connectors
4" To 20" ID Hose
Latch Loc Couplers, made from 16 gauge, galvanized steel, provide a positive lock that won't work loose in ordinary use. Easily attached on site with any standard banding or clamp. They are reusable.
4" To 20" ID Hose
Bridge clamps are preformed to bridge a helical wire, providing a secure fit without leakage for non-cuffed hoses. (Standard screw clamps are also available.)
4" To 18" ID Hose
In 304 stainless steel or galvanized, Slip Loc Couplers provide a quick, convenient means of coupling hose on site when banded with screw clamps. They are reusable.
4" To 24" ID Hose
Available in 20 gauge stainless steel. A quick and easy way to extend any length of duct in the field. With use of bridge clamps, these connectors provide good sealing characteristics.

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.