Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

AIR FITTINGS AND ACCESSORIES
MANIFOLDS, MINI FRL's, MUFFLERS, VALVES

Conical Mufflers

Conical Mufflers are easy to install, threading into the exhaust ports of air tool, valves, cylinders and other pneumatic equipment. They offer an economical method of reducing the noise levels below 90 dBA, conforming with OSHA standards. The 40 micron sintered bronze element is bonded directly to the brass pipe thread fitting.

NOTE: these elements are not replaceable.
Conical Muffler
Part #SizeO/A LengthHex
CMF181/8"29/32"7/16"
CMF281/4"1-1/4"9/16"
CMF383/8"1-9/16"11/16"
CMF481/2"1-13/16"7/8"
CMF683/4"2-1/8"1-3/16"
CMF881"2-7/8"1-3/8"



Muffler / Filters

These muffler / filters feature an exclusive replaceable, washable, oil-resistant sintered bronze element and solid brass construction. For use with air valves, air motors, tire changers and other pneumatic equipment. It effectively reduces noise levels to conform to OSHA standards of below 90 dBA with minimal effect on the air flow.Muffler / Filter
Part #Size
MF1021/8
MF1021/4
MF1033/8



Mini In-Line Lubricators

These lubricators can be refilled under line pressure. Oil capacity is 1/4 fluid ounce. Flow rating is 22 SCFM at 100 PSIG. Aluminum. Maximum operating conditions: 200 PSIG and 175ºF.Mini In-Line Lubricator
Part #Inlet NPTOutlet NPT
ML2001/4 Female1/4 Female
ML200M1/4 Female1/4 Male
ML300M3/8 Female3/8 Male



Mini In-Line Filters

Filter element is rated at 5 microns. Either port may be used as an inlet port. Flow rating is 17 SCFM inlet pressure at 100 PSIG. Maximum operating conditions: 200 PSIG and 175ºF.Mini In-Line Filter
Part #Description
MF2001/4 NPT Female x 1/4 NPT Male



Aluminum Manifolds

Aluminum Manifolds
Part #ABCDEFGHJ
AMF321/4"7-5/8"7/8"1-1/4"1-7/8"3-3/4"1"3/8".20
AMF421/4"7-5/8"1-1/8"1-1/2"1-7/8"3-3/4"1"1/2".20
AMF433/8"8"1-1/8"1-1/2"2"4"1"1/2".20
Aluminum Manifolds
Maximum working pressure is 300 PSI



3 In 1 Manifolds

SUGGESTED APPLICATIONS:
  • Supply 3 air operated tools from a single hose.
  • Mount to pipe at workbench or overhead.
  • Permits use of air by more than one mechanic.
  • Different tools in shop use different styles of couplers.
  • Mount 3 different style couplers on one manifold.
3 In 1 Manifolds
Part #Inlet Thread (1)Outlet Thread (3)
D34041/4" NPT1/4" NPT
D34063/8" NPT1/4" NPT
D34081/2" NPT1/4" NPT



Safety Pop-Off Valves

HEAVY DUTY SAFETY POP-OFF VALVE

High capacity design. ASME Code, National Board Certified Safety Valves are designed to protect un-fired pressure vessels from over-pressure. Equipped with a pull ring for manual testing. Maximum temperature 250ºF.

All brass construction with chrome steel ball on a precision machined brass seat.

3-13/16" Long
Heavy Duty Safety
Pop-Off Valve
1/2" male NPT
Part #Preset PressureSCFM
SV30HD30 psi65
SV100HD100 psi192
SV125HD125 psi234
SV150HD150 psi277
SV175HD175 psi319
SV200HD200 psi361


STANDARD SAFETY POP-OFF VALVE

ASME Code, National Board Certified Safety Valves are designed to protect un-fired pressure vessels from over-pressure. Maximum operating temperature is 250ºF (121ºC). All brass construction with chrome steel ball on a precision machined brass seat. Higher flow / SCFM capacity at rated pressure. 3-1/8" LongStandard Safety
Pop-Off Valve
1/4" male NPT
Part #Preset PressureSCFM
SV3030 psi24
SV100100 psi64
SV125125 psi78
SV150150 psi92
SV175175 psi106
SV200200 psi120


SOFT SEAT SAFETY POP-OFF VALVE

ASME Code Safety Valve, National Board Certified for compressed air service applications. Designed for Original Equipment Manufacturer, utilizing ASME Code un-fired pressure vessels in their finished product. Constructed of precision machined brass bar stock, with a silicone disc seating on brass. Maximum operating temperature is 400ºF (204ºC).Soft Seat Safety Pop-Off Valve
1/4" Male NPT
Part #Preset PressureSCFM
KSV10-100100 psi33
KSV10-125125 psi40
KSV10-150150 psi47
KSV10-175175 psi54



Lever Drain Cocks

For air service only. Lever Drain Cocks are Brass

Lever Drain Cock
Female x MaleLever Drain Cock
Male x MaleLever Drain Cock
Female x Female
Female NPT x Male NPTMale NPT x Male NPTFemale NPT x Female NPT
Part #Description
LDC21/4" FNPT x 1/4" MNPT
Part #Description
LDCM21/4" MNPT x 1/4" MNPT
Part #Description
LDCF21/4" FNPT x 1/4" FNPT



Internal Drain Cocks

Needle Valves

Designed for low pressure water and air applications. Maximum working pressure is 150 PSI. Internal drain cocks are brass.Metal-to-metal seats allow positive sealing and flow adjustment. Designed for air and water applications. Maximum working pressure is 150 PSI. Valves are brass.
Internal Drain CockNeedle Valve
Female x FemaleNeedle Valve
Male x Male
Male NPTFemale NPT x Female NPTMale NPT x Male NPT
Part #Description
D021/8"
D041/4"
Part #Description
NV2F1/8" FNPT x 1/8" FNPT
NV4F1/4" FNPT x 1/4" FNPT
Part #Description
NV4M1/4" MNPT x 1/4" MNPT



Flow Control Valves

Series F

Flow control valves provide precision flow control and full shutoff in one flow direction and automatically allow unrestricted free flow in the opposite direction. Two-step needle provides fine adjustments at low flow with the first three turns of the adjusting knob. The next three turns give full-open needle position and conventional throttling control. When flow is reversed, the heavy-duty poppet / retainer permits full-flow return capacity. Exclusive COLOR-CODED reference scale on the adjusting knob greatly simplifies flow setting, resetting, adjusting and return to an original flow. A simple set screw locks the valve on any desired setting. Maximum operating pressure: Brass - 2000 PSI.Flow Control Valve
Series F
Part #Thread
BCF2001/8"
BCF4001/4"
BCF6003/8"
BCF8001/2"
BCF12003/4"


Series PF

Utilizes a ball type check that meters flow of air in one direction and allows free flow in the reverse direction. Used to control actuator speed by acting as a restriction. Maximum operating pressure: Brass - 2000 PSI, 5 PSI cracking pressure.Flow Control Valve
Series PF
Part #Thread
BPF2001/8"
BPF4001/4"
BPF6003/8"
BPF8001/2"


Series N

Ideal for use as speed controls on pneumatic systems where a reverse flow check valve is not needed. Provides excellent control and reliable shutoff in a very small envelope. COLOR CODED reference scale on the adjusting knob simplifies setting, resetting, adjusting and quick return to a previous setting. Maximum operating pressure: Brass - 2000 PSI.Flow Control Valve
Series N
Part #Thread
BN2001/8"
BN4001/4"
BN6003/8"
BN8001/2"
BN12003/4"



Check Valves - Series C

Provides free flow in one direction and dependable shutoff in the opposite direction. Maximum operating pressure: Brass - 2000 PSI, 5 PSI cracking pressureCheck Valve
Series C
Part #ThreadFree Flow GPM
BCV2001/8"3
BCV4001/4"5
BCV6003/8"8
BCV8001/2"15

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.