Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

HOLEDALL COUPLINGS MACHINES


Mulcorams attach Holedall couplings to hose securely. We offer four machines to meet every hose service requirement.

Mulcorams, known as "rams", are powerful, compact, finely engineered machines designed specifically to swage and internally expand Holedall couplings by hydraulic pressure. Since each ram generates all the hydraulic pressure required to attach the Holedall coupling, one person can easily operate the equipment.



15 Ton Ram

15 Ton Holedall
Coupling Machine
Specially designed ram for internally expanding couplings only. Bench mounted model (optional stand is available), producing up to 10,000 PSI, for up to 15 tons of ram force. Capable of expanding 1" through 3" steel fittings and ¾" through 4" brass Holedall Petroleum fittings. The motor is ½ horsepower, 115 volt, 60 cycle, single phase with foot pedal.



25 Ton Ram

25 Ton Holedall
Coupling Machine
Free standing model producing up to 10,000 PSI of line pressure for up to 25 tons of ram force. Capable of external swaging ¼" through 4" I. D. hose and internal expanding 5/8" through 4" I.D. hose, with proper equipment. The motor is ½ horsepower, 115 volt, 60 cycle, single phase with foot pedal.
 
High speed pump kit option is available.



50 Ton Ram

50 Ton Holedall
Coupling Machine
Bench mounted model (optional stand is available), producing up to 10,000 PSI, for up to 50 tons of ram force. Capable of external swaging 1-¼" through 6" I. D. hose and internal expanding 5/8" through 6" hose, with proper equipment. A 1-1/8 horsepower, 115 volt, 60 cycle, single phase motor is standard with remote (220 / 440 volt motors are available).



100 Ton Ram

100 Ton Holedall
Coupling Machine
Used for swaging Holedall fittings to hose from 1-¼" through 10" I. D. With optional accessories, this ram may be used for internally expanding couplings on hose from 1-¼" through 6". This machine is capable of producing up to 100 tons of ram force. A 1-1/8 horsepower, 115 volt, 60 cycle, single phase motor is standard with remote (220 / 440 volt motors are available).



See Also Hand Operated Coupling Expanders




All Rams require dies of the proper size to reduce the ferrule to the proper diameter for a good grip on the hose. Pushers of the proper size must be used on the end of the Ram to push the Holedall fitting through the die. Die and pusher selection depends on the size and types of hoses being coupled. Ferrule recommendations and a Die Chart binder are available on request. Please call the Tampa Rubber Customer Service Department for specific details.

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.