Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

AIR KING UNIVERSAL COUPLINGS ("CP" COUPLINGS)

CP Hose End

Air King is for air and water service only!

Do not use CP Fittings with Steam

Malleable IronBrass316 S/S
Hose EndsSizePart #Part #Part #
3/8"AMHABHRAMH
1/2"AM1AB1RAM1
5/8"AM5AB5-
3/4"AM6AB6RAM6
1"AM11AB11RAM11
Male NPT Ends1/4"AMB1ABB1-
3/8"AMBABBRAMB
1/2"AM2AB2RAM2
3/4"AM7AB7RAM7
1"AM12AB12RAM12
Female NPT Ends1/4"AMC1ABC1-
3/8"AMCABCRAMC
1/2"AM3AB3RAM3
3/4"AM8AB8RAM8
1"AM13AB13RAM13
Blank EndsAM0AB0RAM0
Triple ConnectionsAM10AB10-

Air King Safety Pins
Wire DiameterPart #
.058"AKSP1
.091"AKSP25
Heavy duty
Oversized
Air King Washers
DescriptionPart #
Black Natural RubberAWR4
NeopreneAWS6
Same size for all coupling sizes
Rubber temp. range: -20ºF to 160ºF
Neoprene temp. range: -20ºF to 190ºF
Neoprene is oil resistant
Safety ClipsS/S Safety ClipsLanyards
AC1AC7ACL8

Note: The use of an Air King Safety Clip or wire type retainer is necessary to assure Air King Universal Couplings will not become accidently disconnected. This guarantees the fittings are properly connected as the pin will not go through holes in mating flanges until couplings are locked in place. Only one Air King Safety Clip or wire type retainer is required for each Air King Universal Coupling.
 
Note: Air King is rated to 150 PSI at ambient temperature (70ºF). Standard Air King fittings come with AWR4 washers.
 
Note: Air King available to meet Mil Spec. WWC-633D on special order.

Air King Hose Ends with Ferrules

Air King with Ferrule

SizeHose OD RangeMalleable Iron316 S/S
From:To:Part #Part #
1/2"27/32"1-1/32"AM1WFRAM1WF
3/4"1-1/16"1-11/32"AM6WFRAM6WF
1"1-18/64"1-34/64"AM11WF-1-
1"1-30/64"1-46/64"AM11WFRAM11WF

Note: Malleable Iron and Stainless Steel Air King Couplings with Carbon Steel Ferrules can be crimped or swaged on. Please call our Customer Service Department for crimp or swage diameter recommendations. Rated to 150 PSI Working Pressure.

3/4" Male Air King with Gauge Port
Part #Material
AM7TMalleable Iron
RAM7TStainless Steel
Note: Drilled to 1/4" NPT for mounting gauge. Gauge is not included.

Air King Universal Swivels
SizePart #
1/2" Male NPTAM2SWIV
3/4" Hose EndAM6SWIV
3/4" Male NPTAM7SWIV
3/4" Female NPTAM8SWIV
Note: These Malleable Iron Universal Swivel fittings interchange with other Air King fittings and include a heavy-duty, free-turning joint that will swivel under pressure to prevent hose kinking. Working Pressure is 150 PSI.
For Air & Water Service Only!

King 4-Lug Quick-Acting Couplings

Four Lug CP
4-Lug FittingsSizeMalleable IronBrass
Part #Part #
Hose Ends1-1/4"AM16AB16
1-1/2"AM21AB21
2"AM26AB26
Female NPT Ends1-1/4"AM18AB18
1-1/2"AM23AB23
2"AM28AB28
Washers: (Fits all 4-Lug Fittings) Part # AWR14
Not to be used for steam service!
Note: Safety Clips are the same size for both 2-lug and 4-lug couplings.
Use Safety Clips on all Universal Coupling applications.

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.