Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

CAM AND GROOVE FITTINGS


Introduction

At Tampa Rubber and Gasket Co., we stock cam and groove fittings from some different manufacturers. In a domestic, Made in USA brand, we stock the "PT Couplings" brand. We also can order from other manufacturers such as Evertite, OPW and Dixon.In the less expensive, imported cam and groove fittings, our stock is either UPD (United Pacific Distributors) or NECO (National Equipment Company). All of these fittings interchange with each other, with the exception of 8" and 10". In these sizes, we stock the NECO brand.

Standard Cam and Groove Fittings

Note: Call the Tampa Rubber Customer Service Department for availability of a specific style and size in aluminum, hard coat aluminum, brass, ductile iron, carbon steel, stainless steel, polypropylene, and fiberglass reinforced nylon.
Camlock
Part ACamlock
Part BCamlock
Part C

Part A: Male Cam x Female NPT

SizePart #
1/2"50-A
3/4"75-A
1"100-A
1-1/4"125-A
1-1/2"150-A
2"200-A
2-1/2"250-A
3"300-A
4"400-A
5"500-A
6"600-A
8"800-A
10"1000-A

Part B: Female Cam x Male NPT

SizePart #
1/2"50-B
3/4"75-B
1"100-B
1-1/4"125-B
1-1/2"150-B
2"200-B
2-1/2"250-B
3"300-B
4"400-B
5"500-B
6"600-B
8"800-B

Part C: Female Cam x Hose Shank

SizePart #
1/2"50-C
3/4"75-C
1"100-C
1-1/4"125-C
1-1/2"150-C
2"200-C
2-1/2"250-C
3"300-C
4"400-C
5"500-C
6"600-C
8"800-C
10"1000-C
Camlock
Part DCamlock
Part ECamlock
Part F

Part D: Female Cam x Female NPT

SizePart #
1/2"50-D
3/4"75-D
1"100-D
1-1/4"125-D
1-1/2"150-D
2"200-D
2-1/2"250-D
3"300-D
4"400-D
5"500-D
6"600-D
8"800-D
10"1000-D

Part E: Male Cam x Hose Shank

SizePart #
1/2"50-E
3/4"75-E
1"100-E
1-1/4"125-E
1-1/2"150-E
2"200-E
2-1/2"250-E
3"300-E
4"400-E
5"500-E
6"600-E
8"800-E
10"1000-E

Part F: Male Cam x Male NPT

SizePart #
1/2"50-F
3/4"75-F
1"100-F
1-1/4"125-F
1-1/2"150-F
2"200-F
2-1/2"250-F
3"300-F
4"400-F
5"500-F
6"600-F
8"800-F
10"1000-F
Camlock
Dust CapDust Plug

Part DC: Dust Cap

SizePart #
1/2"50-DC
3/4"75-DC
1"100-DC
1-1/4"125-DC
1-1/2"150-DC
2"200-DC
2-1/2"250-DC
3"300-DC
4"400-DC
5"500-DC
6"600-DC
8"800-DC
10"1000-DC

Part DP: Dust Plug

SizePart #
1/2"50-DP
3/4"75-DP
1"100-DP
1-1/4"125-DP
1-1/2"150-DP
2"200-DP
2-1/2"250-DP
3"300-DP
4"400-DP
5"500-DP
6"600-DP
8"800-DP
10"1000-DP

Cam & Groove Maximum Allowable Working Pressures

Metal Couplings
SizeMax. Pressure
(PSI)
1/2" through 2"250
2-1/2" through 4"150
5" through 6"75
8" through 10"50

Non-Metal Couplings
SizeMax. Pressure
(PSI)
1/2" through 2"100
2-1/2" through 3"50
Note: The above table should be used as a general guideline only, as these are the recommendations for one of our manufacturer's camlock fittings. These recommendations are based on temperatures between -15º to +100º F. This working pressure information is not meant to be a guarantee, either expressed or implied. If you have any questions, please call the Tampa Rubber Customer Service department.

EZ Boss-Lock Fittings

EZ Boss-Lock Part C

No more fumbling with clamps, wire, clips or pins...Just close the handles and the locking mechanism is engaged!

Unlike other safety couplings:
  • The EZ Boss-Lock is extremely easy to open!! The release lever is under your thumb when you want to open the fitting. ERGONOMIC.
  • The EZ Boss-Lock is resistant to accidental disconnection when being dragged. The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm!
  • The EZ Boss-Lock alerts you if it is not properly engaged. If the rotating lever is not flush with the handle, it is not properly engaged.
  • The EZ Boss-Lock has no sliding pins to jam. The EZ Boss-Lock's rotating action helps keep the locking device free of debris.
  • The EZ Boss-Lock has no sliding pins to pop open. The EZ Boss-Lock is designed to protect critical parts from impact and to withstand rugged use.
  • The EZ Boss-Lock can be supplied with special shanks custom suited to your needs. The EZ Boss-Lock is available with Swaged and PF shank designs, for hard to couple chemical hoses.
  • The EZ Boss-Lock is easier to insert into the hose tubes of Tank Trucks, and easier to use in restricted spaces. This is due to the smaller maximum OD and a more snag free exterior.
  • The EZ Boss-Lock Cam Arm assemblies can be retrofitted onto undamaged stainless steel Boss-Lock. This allows you to protect your investment in stainless steel Boss-Lock couplings while you upgrade.
Most important...the EZ Boss-Lock is made in the USA!

How the EZ Boss-Lock Operates

To Connect:
Close1Close2Close3
Open the coupler by pulling back on the locking lever above the cam arms while rotating the arms away from the body of the coupler. Insert the adapter into the coupler. Close the coupler by rotating the cam arms towards the body of the coupler. Locking occurs when the cam arms are closed. The coupler is properly closed when the locking levers on both cam arm assemblies are flush.
To Disconnect:
Open1Open2Open3
Open the coupler by pulling back on the locking lever above the cam arms while rotationg the arms away from the body of the coupler. Remove the adapter from the coupler. Close the coupler by rotating the cam arms towards the body of the coupler. By locking the coupler when not in use you will help to protect it from incidental damage.

Reducing Cam and Groove Fittings

Reducing Part A
Camlock Reducing
Part A
Male CamFemale NPTPart #
2"1-1/2"2015-A
2"3"2030-A
3"2"3020-A
3"4"3040-A
4"3"4030-A
4"6"4060-A
6"4"6040-A
Reducing Part B
Camlock Reducing
Part B
Female CamMale NPTPart #
1-1/2"1"1510-B
2"1-1/2"2015-B
2"3"2030-B
3"2"3020-B
3"4"3040-B
4"3"4030-B
Reducing Part C
Camlock Reducing
Part C
Female CamHose ShankPart #
2"1-1/2"2015-C
3"2"3020-C
3"4"3040-C
4"3"4030-C
6"4"6040-C
Reducing Part D
Camlock Reducing
Part D
Female CamFemale NPTPart #
1-1/2"1"1510-D
2"1-1/2"2015-D
3"2"3020-D
4"3"4030-D
6"4"6040-D
Reducing Part E
Camlock Reducing
Part E
Male CamHose ShankPart #
1-1/2"1"1510-E
2"1-1/2"2015-E
3"2"3020-E
4"3"4030-E
6"4"6040-E
Reducing Part F
Camlock Reducing
Part F
Male CamMale NPTPart #
1-1/2"2"1520-F
2"3"2030-F
3"1-1/2"3015-F
3"2"3020-F
3"4"3040-F
4"3"4030-F
Note: The six pictures above show what we would call "reducing fittings"; if an adapter is an "increaser", where the camlock fitting is larger than the pipe thread or hose shank, it would look different from the pictures shown.
Reducing Cam
Camlock Reducing
Part DA
Female CamMale CamPart #
1"1-1/2"1015-DA
1-1/2"1"1510-DA
1-1/2"2"1520-DA
2"1"2010-DA
2"1-1/2"2015-DA
2"3"2030-DA
2"4"2040-DA
2-1/2"2"2520-DA
2-1/2"3"2530-DA
3"1-1/2"3015-DA
3"2"3020-DA
3"2-1/2"3025-DA
3"4"3040-DA
4"2"4020-DA
4"2-1/2"4025-DA
4"3"4030-DA
4"5"4050-DA
4"6"4060-DA
5"3"5030-DA
5"4"5040-DA
6"3"6030-DA
6"4"`6040-DA
6"5"6050-DA
Double Male Cam
Camlock Reducing
Part AA
Male CamMale CamPart #
1"1"100-AA
1-1/4"1-1/4"125-AA
1-1/2"1-1/2"150-AA
1-1/2"2"1520-AA
2"2"200-AA
2"3"2030-AA
2"4"2040-AA
2-1/2"3"2530-AA
2-1/2"4"2540-AA
3"3"300-AA
3"4"3040-AA
4"4"400-AA
4"5"4050-AA
4"6"4060-AA
6"6"600-AA
Double Female Cam
Camlock Reducing
Part DD
Female CamFemale CamPart #
2"2"200-DD
2"3"2030-DD
3"3"300-DD
3"4"3040-DD
4"4"400-DD
Note: As stated above, we distribute for several different manufacturers. The above part numbers are from one of the manufacturers for which we distribute. We have other "jump sizes" available from different manufacturers. If you don't see the adapter you want, please call the Tampa Rubber Customer Service department.

150# ASA Flanged Cam Fittings

Flanged Male Camlock
Male Cam x 150# Flange
Male Cam150# FlangePart #
1"1"100-FLA
1-1/2"1-1/2"150-FLA
2"2"200-FLA
3"3"300-FLA
4"4"400-FLA
6"6"600-FLA
Female Cam x 150# Flange
Female Cam150# FlangePart #
1"1"100-FLD
1-1/2"1-1/2"150-FLD
2"2"200-FLD
3"3"300-FLD
4"4"400-FLD
6"6"600-FLD

Note: As stated above, we distribute for several manufacturers of cam and groove fittings. Many other special cam fittings are available, such as:

Cam and Groove Gaskets

Synthetic Rubber Gaskets
SizeBuna-NExtra Thick Buna-NViton®EPDMNeopreneWhite Buna-NSilicone
1/2"50-G-BU50-G-THK50-G-VI50-G-EPR50-G-NE50-G-WB50-G-SIL
3/4"75-G-BU75-G-THK75-G-VI75-G-EPR75-G-NE75-G-WB75-G-SIL
1"100-G-BU100-G-THK100-G-VI100-G-EPR100-G-NE100-G-WB100-G-SIL
1-1/4"125-G-BU125-G-THK125-G-VI125-G-EPR125-G-NE125-G-WB125-G-SIL
1-1/2"150-G-BU150-G-THK150-G-VI150-G-EPR150-G-NE150-G-WB150-G-SIL
2"200-G-BU200-G-THK200-G-VI200-G-EPR200-G-NE200-G-WB200-G-SIL
2-1/2"250-G-BU250-G-THK250-G-VI250-G-EPR250-G-NE250-G-WB250-G-SIL
3"300-G-BU300-G-THK300-G-VI300-G-EPR300-G-NE300-G-WB300-G-SIL
4"400-G-BU400-G-THK400-G-VI400-G-EPR400-G-NE400-G-WB400-G-SIL
5"500-G-BU500-G-THK500-G-VI500-G-EPR500-G-NE500-G-WB500-G-SIL
6"600-G-BU600-G-THK600-G-VI600-G-EPR600-G-NE600-G-WB600-G-SIL
8"800-G-BU800-G-THK800-G-VI800-G-EPR800-G-NE800-G-WB800-G-SIL

PTFE Type Gaskets


Standard Handle Assemblies

DescriptionSizeBrass P/NSintered S/S P/NInvestment S/S P/N
Handle and Pin1/2"50-HP-BR50-HP-SP-
Handle and Pin3/4"75-HP-BR75-HP-SP-
Handle and Pin1"100-HP-BR100-HP-SP-
Handle, Ring and Pin1-1/4" to 2-1/2"200-HRP-BR200-HRP-SP200-HRP-SI
Handle, Ring and Pin3" to 5"300-HRP-BR300-HRP-SP300-HRP-SI
Handle, Ring and Pin6"600-HRP-BR-600-HRP-SI
Handle and Pin8"800-HP-BR--

Note: Please call our Customer Service Department for other Cam and Groove accessories, such as:

Viton® is a registered trademark of DuPont Dow Elastomers

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.