Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

COMPRESSION PACKING TOOLS

Packing Extractors

Packing 
Extractors

A complete integrated line of U.S. made tools designed to handle your packing maintenance with ease. The unique interchangeability of tips with flex or rigid holders allows a versatility not available elsewhere. Worn or damaged tips may be replaced at minimum cost rather than sacrificing the entire tool. Plated for corrosion protection, these tools meet or exceed Government Specifications. Removable tips include: C-1, 2 & 3 Corkscrews for most packing, W-1, 2 & 3 Woodscrews for hardened packing, B-1 & 2 Brush Sets (two sizes each set) for cleaning the stuffing box, OP-1 & 2 Oakum Pullers, and LG-1 & 2 Lantern Gland Thread Adapter Sets (three thread sizes per set). Also included into the line are Solid Shaft Picks P-7, 8 & 9 to remove packing that breaks up easily, Stainless Steel Vernier Calipers to accurately determine packing requirements, an O-Ring Extractor constructed with the proper curve and offset to make a sometimes difficult job easy - without risk to equipment, and a Packing Knife with sheath. A keen edged Stainless blade mounted in a wooden handle for a good grip, makes a fine addition to any tool box.

TOOLS
Part #LengthShaftTipThreadPackingSet ASet BDeluxe
F-17-½"FlexibleRemovable8-325/16"-up222
F-211"¼-207/16"-up222
F-314-½"1/2"-up-22
F-419"Permanent-5/8"-up---
F-523"3/4"-up---
F-630"1"-up---
S-16"SolidRemovable8-325/16"-up--2
S-210"¼-207/16"-up--2
S-314"1/2"-up--2
S-418"Permanent-5/8"-up---
S-524"3/4"-up---
P-710"Picks1/8"-up111
P-83/16"-up111
P-95/16"-up111
OR6"-O-Ring----2



TIPS
Part #TipThreadFits Tool:Set ASet BDeluxe
C-1Corkscrew-F & S-1111
C-2F & S-2 & 3111
C-3-11
W-1WoodscrewF & S-1-11
W-2F & S-2 & 3-11
W-3-11
B-1Brush Set
(2 sizes per set)
F & S-1--1
B-2F & S-2 & 3--1
LG-1Lantern Gland
Thread Adapter
8-32, 10-32, 10-24F & S-1--1
LG-2¼-20, ¼-28, 5/16-18F & S-2 & 3--1
OP-1Oakum Puller-F & S-1---
OP-2F & S-2 & 3---
Wrench111
Packing Cutting Knife With Sheath--1
Rust Proof Tool Box111



Guillotine Packing Cutter

Guillotine 
Packing Cutter

Easily cuts all packing including Kevlar, copper sheathed and wire core packing to 1" diameter at 45º or butt angles. 4" maximum shaft size direct-reading Diameter / Circumference scales eliminate expensive time and material waste from costly trial-and-error fitting. Complete with mounting screws, wrenches, stop blocks for 45º and butt cutting, and a vernier caliper for accurate shaft and stuffing box measurement. Heat-treated spare tool steel blades are available.
Packing rings cut accurately with a 45º angle seal much more effectively than butt cut rings. With properly cut rings, and then staggering these cuts in the gland, very low leakage rates can be obtained.Angle Cut 
Packing Rings

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.