Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

SLADE COMPRESSION PACKING

No Flush, No Leak Sealing!

Slade Packing

Twelve years of materials testing produced a tough, lubricious mineral composite which is capable of transforming the seal cavity into a heat sink. Seal water and leakage can be eliminated.

Easy Installation

  • Seal Foil is easier to install than packings.
  • No disassembly required.
  • Replacement unnecessary, just add segments.
  • Use maximum of five segments for optimum performance.

Six Times Better

  • No leakage required.
  • No flush water allowed.
  • No seal water to 4800 FPM.
  • No weight loss at 1000ºF.
  • Outlasts packings 6 to 1.
  • Virtually no shaft wear.

Superior Services

  • Services to 1800ºF.
  • Reduced amperage typical.
  • Inert: pH 0-14
  • Seals abrasive slurries

Slade Packings are...

Emission safe Leak-Free Fire Safe

Emission Safe

Leak-Free

Fire Safe


3300C

The original Slade carbon fiber reinforced foil packing, 3300C is a premium general service packing. It is constructed with an interlock braid, with each strand passing through the body of the packing for maximum tensile strength.

Limits

  • Temperature (Non-Oxidizers): -400ºF to +5400ºF
  • Temperature (Steam): 1800ºF
  • Valve Pressure: 1000 psi
  • Pumps: No flush service to 4800 fpm
  • pH range: 1 to 14

Options

  • 3300W: Inconel wire reinforced 3300C for higher pressures.
  • 3300LC: Low Chloride version for Nuclear plants.

3300G

Same as 3300C except carbon fiber braided into the corners to provide anti-extrusion at higher pressures without end rings. Our all-purpose service packing for pumps with no flush required; high pressure valves in chemicals, steam, hydrocarbons.

Limits

  • Temperature (Non-Oxidizers): -400ºF to +5400ºF
  • Temperature (Steam): 1800ºF
  • Valve Pressure: 5000 psi
  • Pumps: No flush service to 4800 fpm
  • pH range: 1 to 14

Options

  • 3300G CV: For use on control valves in Hydrocarbon services.
  • 3300G LC: Low Chloride version for Nuclear plants.

3300K

Same as 3300C except Kevlar fiber corners. Our best reciprocating pump packing for severe abrasives, black liquor, oil well sucker rods, high pressure reciprocating rods, etc.

Limits

  • Temperature: Maximum 500ºF
  • Pressure: 5000 psi
  • Pumps: No flush service to 3000 fpm
  • pH range: 2 to 12

3300CJ

Same as 3300C except with a carbon fiber jacket. May be used for anti-extrusion for very high pressures. Service equivalent to Crane 187-I.

Limits

  • Valve Pressure: 10,000 psi

Options

  • 3300CJK: 3300CJ construction with Kevlar corners.

3300GLC

Slade 3300GLC is PTFE-free. It is constructed the same as 3300C, except for nuclear power services.

Limits

  • Valve Pressure: 4500 psi
  • Temperature: 1800ºF
  • pH range: 0 - 14 (except strong oxidizers)
  • Graphite foil purity: 99.26% pure
  • Leachable chlorides: 10ppm
  • Leachable fluorides: 10ppm

SLADE FEET PER POUND CHART
Packing Size3300G3300C3300CJ3300CJK
WidthHeightFt/LbFt/LbFt/LbFt/Lb
 
0.1250.18850.050.0**
0.1250.12574.974.9**
0.1880.18833.333.3**
0.1880.37524.124.2**
0.2500.25025.025.625.6*
0.2500.31320.024.9**
0.3130.31316.419.916.8*
0.3750.37511.613.812.511.1
0.4380.4388.410.710.09.1
0.5000.5006.58.08.37.5
0.5630.5635.76.56.75.9
0.6250.6254.65.35.44.8
0.6880.6883.94.44.54.0
0.7500.7503.33.73.83.3
0.8130.8133.13.23.22.9
0.8750.8752.72.72.92.6
0.9380.9382.32.42.62.3
1.0001.0002.12.22.32.2
1.0631.0631.92.02.01.9
1.1251.1251.71.81.81.7
1.2501.2501.41.41.41.4
1.5001.5000.91.01.01.0
* Unavailable

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.