Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

URETHANE PROFILE BELTING

Orange-Go®, Clear-Go® and Quik-Go®

Urethane Belt
Orange-Go®Clear-Go®
  • Orange color, 85A Durometer.
  • USDA approved.
  • Most widely used general purpose urethane belt.
  • High coefficient of friction.
  • Highly flexible, allowing small pulley diameters.
  • Self tensioning, does not require take-ups.
  • Excellent abrasion resistance.
  • Ease of installation, stretches over pulleys.
  • Good chemical resistance.
  • Clear color, 95A Durometer.
  • USDA Approved.
  • Carries heavier loads than Orange-Go® with less stretch.
  • Lower coefficient of friction than Orange-Go®.
  • Requires larger pulleys than Orange-Go®.
  • Self tensioning, does not require take-ups.
  • Excellent abrasion resistance.
  • Ease of installation, stretches over pulleys.
  • Good chemical resistance.
Easily spliced endless using the Butt Welding Kit.
Clear color, 85A durometer - made to order only.
Quik-Go®
  • Clear color, 85A Durometer.
  • Hollow construction.
  • Highly flexible.
  • Good chemical resistance.
  • Installs without disassembling shafts.
  • Made endless with barbed connector; no welding.

Profiles available in Orange-Go®, Clear-Go® and Quick-Go®

  • Round Sections: 3/32", 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8" & 3/4"
  • V-Sections: 3L (3/8" Top), A (1/2" Top), B (21/32" Top), C (7/8" Top) & D (1-1/4" Top)
  • 3L T-Top: 9/16" top width
  • Twin 3L: 15/16" top width
  • Twin A: 1-3/16" top width
  • AA: 1/2" overall width
  • BB: 21/32" overall width
  • A-Ridge Top: 1/8" ridge height
  • A-High Top: 5/16" ridge height
  • Quik-Go® Round Sections: 3/16", 1/4", 5/16", 3/8", 1/2" & 5/8"

Butt Welding Kit

Urethane Belt
Butt Welding Kit
The Butt Welding Kit provides a fast, economical way to join the ends of Orange-Go®, Clear-Go® and even Quik-Go®. Kit includes belt cutters, flash cutters, clamping tool, hot knife, instructions and carrying case. The clamping tool is easy to use and ensures proper alignment of belt ends.

Urethane O-Rings and Twisted O-Rings

Urethane O-Rings
O-RingsTwisted O-Rings
  • Available in all standard Orange-Go® and Clear-Go® sizes and durometers.
  • Welded endless.
  • Highly elastic, excellent memory.
  • High coefficient of friction.
  • Accommodates misaligned shafts.
  • Clear color, 85A Durometer.
  • Special hook design allows easy installation.
  • Strength comparable to O-Rings.
  • High coefficient of friction.
  • Accommodates misaligned shafts.
  • Lengths available welded to customer specifications.
  • To Order Specify:
      Cut Length or
      Inside Diameter or
      Circumference
  • (We prefer Cut Length)
  • Stock Sizes, Twisted O-Rings:
      3/16" x 5-1/2"
      3/16" x 6"
      3/16" x 12"
      3/16" x 12-1/2"
      3/16" x 13"
      3/16" x 13-1/2"
      3/16" x 14-1/2"

Hyfen® Reinforced Urethane Belting

Hyfen<sup>®</sup> Reinforced Urethane Belting

Characteristics

  • Blue-green color.
  • Round sections, 85A Durometer.
  • V-sections, 85A Durometer.
  • First reinforced urethane open ended belt.
  • Excellent strength.
  • Patented overlap splice.
  • Very low stretch.
  • Good flexibility allows small pulleys.
  • Requires mechanical take-up.
  • High coefficient of friction.
  • Good chemical resistance.
  • Highly resistant to abrasion.
  • Replaces standard urethane belting in high load applications.

Size Ranges

  • Round Sections: 1/4", 5/16", 3/8", 1/2", 9/16", 5/8" & 3/4"
  • V-Sections: (Cogged or Uncogged)
      A - 1/2" wide x 3/8" high
      B - 21/32" wide x 1/2" high
      C - 7/8" wide x 5/8" high

Power-Twist® Polyester Link Belting

Logo Power-Twist<sup>®</sup> Belt

Characteristics

  • Polyester/Polyurethane construction.
  • Red color.
  • Hand assembled to any length.
  • Horsepower ratings equivalent to classical section V-belts.
  • Higher resistance to oil, water, extremes of temperature, chemicals and solvents.
  • Twist-lock construction allows quick, hand-assembly and installation without dismantling drives.
  • Ask about FDA approved Poly-Twistlink for food conveying applications.
  • V-Sections (Top widths)
      3L (3/8" wide)
      A (1/2" wide)
      B (21/32" wide)
      C (7/8" wide)
All products, pictures and descriptions on this page are copyrighted by
Fenner Drives

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.