Tampa Rubber and Gasket
Tampa Rubber Home PageTampa Rubber CatalogTampa Rubber Order FormTampa Rubber Line CardDirections to Tampa Rubber

STAPLE BELT FASTENERS

Ready Set Staple Belt Fasteners

The Ready Set Staple System

With the Ready Set Staple fastener system, an extended plate design separates the point of staple penetration from the line of belt flexing, thus eliminating splice fatiguing that results from sawing action at the point of attachment.
 
High tensile, stainless steel staple fasteners are furnished in strips with a bridge between each fastener plate. This strip design prevents individual parts from getting into the product being conveyed - eliminating a problem that may occur with some hook or teeth types of fasteners. The Ready Set Staples provide a strong splice, resistance to impact damage, and a smooth, unrippled joint that makes hinge pin insertion easier.
 
Ready Set Staples work between carcass fibers without severing them. Staples are hammer-driven through the belt, then clinched cross-wise to the belt, so that belt tension does not pull against the staples to unclinch them.

Applications

Light and medium-duty conveyor belts in package and baggage handling, cased goods, parts, food, wood and agricultural products.

Installation Method

A portable, lightweight application tool can be easily carried to the job site. This tool holds the belt and fastener while staples are driven with a hammer.

Fastener Profile

Smooth, low profile facilitates operation with diverters and shears.

PIW (Pounds per Inch Width)

For belts with mechanical fastener ratings up to 200 PIW.

Metals Available

Staple fasteners are available in steel and type 316 stainless steel.

Range

Staple fasteners are for use on belts from 1/16" to 1/4" thick.

Pulley Diameter

Ready Set Staple Fasteners operate smoothly over pulleys as small as 2" in diameter.
Staple Belt Fasteners
Staple Fastener Selection Chart
Fastener #PIW RatingBelt ThicknessMin. Pulley Diameter
RS621001/16" to 1/8"2"
RS1251601/8" to 3/16"3"
RS1872003/16" to 1/4"4"

Ordering Information

Complete Fastener Joint Ordering Numbers
Belt WidthWith Nylon Covered Steel CableWith Steel Spring WireWith Stainless Spring WireWith Nylon Covered Stainless Cable
RS62 Plated SteelRS62 Stainless Steel
24"RS62J24NC-RS62SJ24SSRS62SJ24NCS
36"RS62J36NC-RS62SJ36SS-
48"RS62J48NC-RS62SJ48SSRS62SJ48NCS
60"RS62J60NCRS62J60SPRS62SJ60SS-
RS125 Plated SteelRS125 Stainless Steel
12"RS125J12NC--RS125SJ12NCS
18"RS125J18NC-RS125SJ18SSRS125SJ18NCS
24"RS125J24NCRS125J24SPRS125SJ24SSRS125SJ24NCS
30"RS125J30NCRS125J30SPRS125SJ30SSRS125SJ30NCS
36"RS125J36NCRS125J36SPRS125SJ36SSRS125SJ36NCS
42"RS125J42NC---
48"RS125J48NCRS125J48SPRS125SJ48SSRS125SJ48NCS
60"RS125J60NCRS125J60SPRS125SJ60SSRS125SJ60NCS
RS187 Plated SteelRS187 Stainless Steel
12"RS187J12NC---
18"RS187J18NC---
24"RS187J24NC-RS187SJ24SSRS187SJ24NCS
30"RS187J30NC-RS187SJ30SSRS187SJ30NCS
36"RS187J36NC-RS187SJ36SSRS187SJ36NCS
48"RS187J48NC-RS187SJ48SSRS187SJ48NCS
60"RS187J60NC-RS187SJ60SS-
Note: Each carton contains four complete fastener joints with hinge pins and stainless steel staples.

Hinge Pins

Bulk Coils

For # RS62
LengthOrdering #
Nylon Covered Steel
10'NC62-X
100'NC62-C
Nylon Covered Stainless
10'NCS62-X
100'NCS62-C
For # RS125
LengthOrdering #
Nylon Covered Steel
10'NC1-X
100'NC1-C
Nylon Covered Stainless
10'NCS1-X
100'NCS1-C
For # RS187
LengthOrdering #
Nylon Covered Steel
10'NC187-X
100'NC187-C
Nylon Covered Stainless
10'NCS187-X
100'NCS187-C

10 Pin Packages

For # RS62
LengthOrdering #
Steel Spring Wire
24"SP62-24
36"SP62-36
48"SP62-48
60"SP62-60
Stainless Spring Wire
24"SS62-24
36"SS62-36
48"SS62-48
60"SS62-60
For # RS125
LengthOrdering #
Steel Spring Wire
18"SP1-18
24"SP1-24
30"SP1-30
36"SP1-36
42"SP1-42
48"SP1-48
60"SP1-60
Stainless Spring Wire
18"SS1-18
24"SS1-24
30"SS1-30
36"SS1-36
42"SS1-42
48"SS1-48
60"SS1-60
For # RS187
LengthOrdering #
Steel Spring Wire
18"SP2-18
24"SP2-24
30"SP2-30
36"SP2-36
48"SP2-48
60"SP2-60
Stainless Spring Wire
18"SS2-18
24"SS2-24
30"SS2-30
36"SS2-36
48"SS2-48
60"SS2-60

The Staple Installation Tool

The RSC187 staple tool (pictured at the top of this page) accurately installs two staples simultaneously for quick, dependable splice installation. Numbers RS62, RS125 and RS187 fasteners are each installed with the Series RSC187 tool. Tools come complete with guide blocks and driver. RSC187 tools are available in a variety of sizes which allow varying amounts of belt width to be laced at one position. Tools can be moved rapidly along the belt as staples are installed. Tools, up to 24" wide, speed splicing. Wider tools are available for production lacing and fabrication shop requirements.
Installation Tools
LengthOrdering #
2"RSC187
4"RSC187-4
6"RSC187-6
12"RSC187-12
24"RSC187-24

Staple Kits

Everything you need to install, maintain and repair numbers RS62, RS125 and RS187 Staple belt splices. Lightweight, only 16-½ lbs. Kit includes a RSC187 installation tool, staple set plate, hand skiver, belt marker, belt nippers, and a 1 lb. hammer. All packaged in a durable metal box with plenty of room left over for other items.
Staple Kits
DescriptionOrdering #
6" Installation KitRSTK4-6
12" Installation KitRSTK4-12

line

GO TO TABLE OF CONTENTS

GO TO MAIN PAGE

line

Tampa Rubber & Gasket Co., Inc.

215 North 20th Street
Tampa, FL, USA 33605
Ph-813-247-3647 Fax-813-247-3180
Toll Free-800-940-4673 E-Mail - The Post Office
Visa Mastercard
American Express Discover
We accept Visa, Mastercard, American Express & Discover


Validated!
click here

w3c Validated
COPYRIGHT © 1998-2004 TAMPA RUBBER & GASKET CO., INC.